Threaded tube; 3/8-24 RH x 3-3/8" long
| Quantity | Price per item | Discount |
| 10 items | C$10.35(≈ USD 7.22) | 10% off |
| 40 items | C$6.89(≈ USD 4.81) | 40% off |
Buy 10 of one part number, get 10% off.
Buy 40+ to get them for 40% off! Sorry, no additional discounts applicable.
5/8" OD seamless tubing, threaded 3/8-24 RH both ends.
Often used in our sway bar kits to extend the linkage by using two male rod ends.
- Threaded tube
This threaded tube worked great! it was just what I needed to secure an engine torque brace to the frame of my drag race car, Most of the tube is inside the frame, I drilled a hole through the frame and welded both ends.of the tube to the frame and The end of the turnbuckle was bolted in one end of the threaded tube and the other end of the turnbuckle was bolted to the motor. It is a quality threaded tube and should hold up well.
Buy 10 of one part number, get 10% off.
Buy 40+ to get them for 40% off! Sorry, no additional discounts applicable.
5/8" OD seamless tubing, threaded 3/8-24 RH both ends.
Often used in our sway bar kits to extend the linkage by using two male rod ends.
- Threaded tube
This threaded tube worked great! it was just what I needed to secure an engine torque brace to the frame of my drag race car, Most of the tube is inside the frame, I drilled a hole through the frame and welded both ends.of the tube to the frame and The end of the turnbuckle was bolted in one end of the threaded tube and the other end of the turnbuckle was bolted to the motor. It is a quality threaded tube and should hold up well.